| Customization: | Available |
|---|---|
| Type: | Air-Cooled |
| Cooling Method: | Air-cooled |
|
Still deciding? Get samples of US$ 35000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Air-Cooled Full Heat Recovery Water Chiller
The main unit is equipped with semi-hermetic screw compressor, integrating the motor, without worrying about shaft seal leakage.
The single or more compressors are provided with startup-shutdown cycle control program so as to uniformly load parts and extend service life. Multiple refrigerating circuits are provided for the unit, and when one circuit is under maintenance, other circuits are able to run normally as mutual standby. Unload and step down voltage start is provided for the compressors to prevent the impact on the power grid.
Ultra-low noise turbine blade design.
V-shaped appearance provides better heat dissipation.
The high-temperature unit is able to provide 55-60ºC hot water for air conditioning system, and the heat recovery type provides water for living, which conform to the Head-Power's high requirements on energy saving.
The unit enjoys compact structure, covers small area, saves machine room space; it almost not vibrates due to the provision of foundation anti-vibrating measure.
Upon delivery of the unit, the refrigerant and lubricating oil have been filled into it, then it's only necessary to connect the evaporator water pipe during installation, saving time and cost.
Intelligent program control can be achieved for the unit according to the load demand: 100%, 75%, 50%, 25% (or start), 0 and stepless energy adjustment, reducing energy consumption.
Total parts number of screw compressor is only 1/10 that of the reciprocating compressor, enabling the unit to have simple structure and less venerable parts, without the use of air intake and exhaust valves, not sensible to wet stroke and extremely low fault rate.
Failure-free operation time of the screw compressor is up to 40,000 hours.
Pressure protection: High and low-pressure protecting devices
Motor protection: Voltage-loss protection, phase-loss protection, inverse phase protection and over-heat protection. Anti-freezing protection: The unit will stop running in case of excessively low chilled water temperature
.
Above device protections ensure the safe and reliable running of the unit.
For example.
Specifications:
| Model | HWAL560 |
| Cooling capcity | 558kw |
| Power supply | 380V/3PH/50Hz |
| Cooling power input | 179kw |
| Refrigerant | R22/R407C |
| Compressor type | Semi-hermetic Screw Type |
| Power | 164kw |
| Quantity | 2 units |
|
Air Cooled Condenser and condensing fan |
Copper tubes with hydrophilic aluminium fins |
| Ultra low noise axial type | |
| Top discharge | |
| 10*1.5 | |
| Evaporator | Shell and tube |
| 12 / 7 | |
| 97 | |
| 74 | |
| DN125 | |
| Electric controller |
LCD English display screen/touch screen, automatic microcomputer controller, failure alarm, error checking,balance operation time, Timer on/off,abnormal status display, etc |
| Safety devices |
High&low pressure switch, anti-frozen protection, over load protection, overheat protection,phase sequence protection,etc |
| Net weight | 4980 |
| Dimensions(L*W*H) | 3500x2200x 2150*2 ( 2 part) |
| R22 Air Cooled Water Chiller With Screw Compressor, Double Circuit System | |
){kind=link}